|
||||||||
Wiggler Centre Finder | Edge Finder and Centre Finder | |||||||
Item Code No. ABM-EPT-2969 |
Item Code No. ABM-EPT-1970 |
|||||||
* These sets are fast effective way of locating the working centre on lathes, bench drills and milling machines * Hardened Steel points and contacts ensure accurate location * The four attachments snap fit into the chuck without removing the collets nut and redusing down time 5 pieces set imperial * Chuck with 4 arms * Comes in attractive plastic pouch |
Tip Dia. MM |
Shank Dia. MM | ||||||
Edge Finder |
||||||||
- | 9 | |||||||
5 | 12 | |||||||
Combination Edge and Centre Finder |
||||||||
5 | 12 | |||||||
5 | 9 | |||||||
Double Edge Finder |
||||||||
5 | 12 | |||||||
Edge Finder - Metric |
||||||||
10 | - | |||||||
4 | 10 | |||||||
10 | - | |||||||
Centre Finder |
||||||||
- | 12 | |||||||
- | 9 | |||||||
Plain Edge Finder |
||||||||
12 | 12 | |||||||
Stepped Shank Edge Finder | ||||||||
- | 9 | |||||||
* Hardened all over
and ground on all
* Edge Finder Works
Well on Round
* The Centre Finder
will Pick up Cross |
||||||||
Round Bar Centre Finder | Machinist Scraper | |||||||
Item Code No. ABM-EPT-3041 |
Item Code No. ABM-IMT-3993 |
|||||||
Shank Dia. | Overall Length |
Styles |
Size | |||||
3/8" (9.5 mm) | 4-1/8" (105 mm) | Triangular | 4" | |||||
Flat | 4" | |||||||
* Accurately and quickly locates center on round work piece * For execution place the tool in drill chuck or collet and line up pointer with line scribed on shaft * Supplied with instructions
|
Half Round | 4" | ||||||
Triangular | 6" | |||||||
Flat | 6" | |||||||
Half Round | 6" | |||||||
Triangular | 8" | |||||||
Flat | 8" | |||||||
Half Round | 8" | |||||||
Triangular | 10" | |||||||
Flat | 10" | |||||||
Half Round | 10" | |||||||
* Extremely useful accessory for Scraping * Made of Hardened and Tempered Steel * Available in Triangular, Flat and Round Shapes |
||||||||
Scribers / Scrapers | Triangular Scraper | |||||||
Item Code No. ABM-IMT-4007 |
Item Code No. ABM-IMT-4005 |
|||||||
Scriber / Scraper |
Description |
|||||||
Made from Tool Steel, both end | Hollow Ground Cutting Edges | |||||||
hardened. One end chisel. | Solid Cutting Edges | |||||||
Overall Length 7" (175 mm) | ||||||||
* Very Popular small tool * Useful for scraping, trimming and deburring metals, tubing and other material * Hardened and Tempered * Triple edge blade is secured in wooden handle with steel ferrule * Available with Solid Cutting Edge as well as Hollow Ground Cutting Edges |
||||||||
Pocket Scriber | ||||||||
Replaceable hardened and Centre | ||||||||
less ground point. Point reverses | ||||||||
into knurled body for safety. overall | ||||||||
Length 5-7/8" (147 mm) | ||||||||
Pocket Scraper | ||||||||
Hardened, Tempered Point | ||||||||
Overall Length 4-1/2" (112 mm) | ||||||||
Three Point Scriber | ||||||||
Steel Knurled Body, with three | ||||||||
interchangeable threaded points, | ||||||||
short straight, short bent and long | ||||||||
bent | ||||||||
Overall Length of tool with two | ||||||||
short point is 9" (225 mm) and | ||||||||
with one short and one long | ||||||||
point is length 12" (300 mm) | ||||||||
Fixed Two Point Scraper | ||||||||
Hardened and ground steel | ||||||||
needle points are fixed to a knurled | ||||||||
body, has one straight point and | ||||||||
one bent point | ||||||||
Overall Length 7-1/2" (190 mm), | ||||||||
8-1/2" (212 mm) | ||||||||
Carbide Scraper | ||||||||
Can be used on hard surface | ||||||||
Long Life, fixed points. 6" Long | ||||||||
Available in Plastic and Steel Body | ||||||||
Pages 1 2 3 4 5 6 | ||||||||
Click to go one level up |